Thin section bearings delivers exceptionally thin type bearing section, also the product of small, lightweight. Product diversity expanded the scope of its use. Achieve extremely thin type bearing section, also the product of small, lightweight. Product diversity expanded the scope of its use.

　　Thin-walled bearing characteristics of the product

In order to get the low bearing friction torque, high rigidity and good rotation accuracy, using small diameter steel balls. Hollow shaft, ensuring light and wiring space. Thin-walled bearing achieve extremely thin type bearing section, also the product of small, lightweight. Product diversity expanded the scope of its use.

Whether thin section bearings and the wheel bearing is oblique bearings , their maintenance step is very similar to that now, with thin-walled bearing for example to relate the maintenance procedures.

1. first remove the wheel, remember to screw well out of trouble;

2. remove the bearing, and some wheels have a tight core, bearing it is difficult to remove, use a hex wrench (is the one that removed the screws) to dig it down, rest assured that bearing is not easy!

3. Palin with a toothbrush brush off surface dirt, you do not do this step is OK, not bad!

4. bearing the side cover is detachable, and some are not, first determine whether Palin you are detachable. How to judge? don't worry! if the bearing edge of the side cover, there is a c-shaped rings, was detachable, no, is not down, but there are exceptions!

5. If it is removable, it's simple! with a precision screwdriver, in the c ring gap, will the c-ring to pry up and then take off the side cover, as long as the split is good Oh! C ring and side cover away, wash you "might" want to put them back!

6. If it cannot be removed, so much trouble! in a destructive way. Precision screwdriver inserted into the seam of the side cover, pry up the side cover, do not doubt, that's it, but that's not got a side cover back on! well, lose it! remember, as long as the split is good, remove side destroyed!

7. side cover on the bearing side are all removed, you can begin to wash, then! spotting oil into Bowl, threw a stir to the bearing.

Thin-walled bearing lubrication method

Bearing lubrication method is divided into grease lubrication and oil lubrication. In order to make a good function, first of all, to select suitable for conditions of use, use of lubrication method. If we only consider the lubrication oil lubrication lubrication advantage. However, grease-lubricated bearings can be simplified around the structure of the specialist will compare the advantages and disadvantages of grease lubrication and oil lubrication.