Wheel bearings are properly installed, affect precision, long life and performance. Prior to installation, we must know how to properly install the wheel bearing. Following small make up to you to clear the installation steps.

1, cleaning bearings and related parts of the bearing.

2, check the size and finishing of correlative parts.

3, the installation.

4, check the bearing is installed.

5, supplies lubricants.

Hope in the forthcoming installation, just open the bearing casing. Grease lubrication, no cleaning, fill the grease directly. Oil lubrication, ordinary or cleaning, however, instruments or high speed bearing used, wash with clean oil, removing rust from coated bearings. Remove rust-proof bearings, rust, so it cannot be placed aside. Besides, sealed in grease bearings, no cleaning directly.

Bearing installation methods vary depending on the bearing structure, coordination and conditions, generally due to rotate, so need to fit the inner ring. Bearings with a cylindrical bore, press onto, or multiple-use built-up method. Tapered bore, mounted directly on tapered shaft or sleeve installation.

When mounted to the enclosure, clearance, there is interference in the outer ring, often using presses into, or have installed after the cooling method for shrink fit. With dry ice as a cooling agent, installation of shrink fit occasion, moisture in the air will condense on the bearing surface. So, you need appropriate antirust measures.

How to choose the right wheel bearing

1. tapered roller bearing-tapered roller bearings are roller bearings, one of the most important components. Compared with conventional bearings, castors for their special advantage is that expanded the field of use, are also able to provide improved mobility.

2.-in addition to wear resistance for roller bearings and deep groove ball bearings, but the heavy-duty bearings are mainly used in seismic and castors for transport equipment. Compared to other bearings and roller bearings, with its low installation height, low rolling resistance and is known for its huge load. Equipped with roller bearings, wheel speed must not exceed 4 km/h, close to walking speed.

3. precision ball bearings – unique design and meet Germany industry standards (DIN) single-row radial ball bearings, precision bearings of the highest quality models. With these ball bearing wheels carrying maximum loads, can still maintain a very low rolling resistance.

4. General-bearing wheel bearing bearing is the most simple form of sliding or friction. They can shock, almost no maintenance, and based on material properties, can also be corrosion-resistant. If the device only in the case of short-distance, low-speed mobile.

5. to sum up, know that caster except other than wheels, wheel diameter and bearing wheel bearing decided the castors for mobility, or even quality casters. Therefore, the choice of quality wheel bearings can improve the quality of Castor, small reminder, select high quality casters choose high quality wheel bearings.