Thin section bearings delivers exceptionally thin type bearing section, also the product of small, lightweight. Product diversity expanded the scope of its use. Achieve extremely thin type bearing section, also the product of small, lightweight. Product diversity expanded the scope of its use.

Product characteristics of thin-walled bearing:

In order to get the low bearing friction torque, high rigidity and good rotation accuracy, using small diameter steel balls. Hollow shaft, ensuring light and wiring space. Thin-walled bearing achieve extremely thin type bearing section, also the product of small, lightweight. Product diversity expanded the scope of its use.

Thin-walled-6700, 6800 series has a dust cover, flange, stainless steel, wide form, variety.

　　Thin-walled bearing maintenance program:

1. bearing installation and removal caution

Different types and sizes of thin-walled deep groove ball bearings, installation methods and tools are not the same, with mechanical or hydraulic. Here are some common basic installation methods and considerations.

(1) on a ball is not installed, this can result in local overload of ball and the contact surface, causing premature bearing failure.

(2) do not use hard tools, such as beating a bearing surface, such as hammers, screwdrivers, this will let the bearing outer ring fracture or cracking.

2. clean bearings

Clean environment is very important for bearings. Thin-walled deep groove ball bearings from rotating and rolling elements of precision surface roughness is probably 1/10 μ m, smooth ball bearing surface, if contaminated, the implications are very serious. Lubricating layer between the rolling surface is usually 0.2~1 μ m, greater than the lubricant size particles of impurities may be excessive rolling of rolling elements in self-aligning roller bearing steel in the partial pressure will eventually lead to permanent fatigue. In addition to this, the environment of dust particle size can be up to 10 μ m, will reverse roller bearing damaged. Because of this, clean working environment is how important it is for bearing.

3. technology of bearing detection

In use by heating in induction bearing operating temperature, if the temperature exceeds the specified limit, then automatically alert, to prevent the occurrence of hot box. With high temperatures often bearing in an abnormal situation. High temperature but is also harmful to the bearing lubricant. Thin-walled deep groove ball bearings to overheat sometimes can be attributed to the bearing lubricant. If bearing more than 125 ℃ temperature for long and didn't even move to reduce the bearing life. Cause of high temperature bearings including: may be insufficient bearing lubrication lubricant is not qualified, which contain impurities, excessive load, they also may be the bearing internal clearance not enough oil seal friction and so on.